Dr.TTIT
CET CODE - E015
drttit
Estd. 1986
DR. T. THIMMAIAH INSTITUTE OF TECHNOLOGY
Oorgaum, Kolar Gold Fields, Karnataka - 563120
Affiliated to Visvesvaraya Technological University, Belagavi
Approved by AICTE - New Delhi,
ISO 21001:2018 Certified
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING
  The Department of Electronics and Communication Engineering was started in the year 1993 with the idea of equipping young people with the necessary technical knowledge and professional skills needed to address the challenges in the rapidly growing field of Electronics and Communication Engineering and promoting research in this area headed by Prof. Ruckmani Divakaran.

  ECE department is a dynamic and vibrant department with 17 highly qualified, experienced and dedicated faculty members. The department meets the growing requirement of practical design engineers in the country and abroad. The curriculum in Electronics and Communication Engineering lays greater emphasis on design principles and development of Communication models, Signal Processing, Image processing, Embedded Systems and VLSI. The young, dynamic and dedicated Staff members have succeeded in establishing the highest standards of coaching the students and to equip them to face the future with confidence. The Department is also successful in achieving VTU ranks.
Vision
To produce creative and competent technocrats with social responsibilities to face the challenges by incorporating academic excellence and latest trends to make a significant contribution to the society in the frontier areas of Electronics and Communication Engineering.
Mission
To achieve the vision, the department will
  1. Provide Quality Education to achieve excellence in technical education.
  2. Develop innovative and simple instructional materials to drive the concepts into the minds of students.
  3. Empower students with the state of art hardware and software technologies to meet the growing challenges of the industry.
  4. To expose the students to behavioral training programs and to develop their overall personality and social consciousness.
drttit-Faculty Email ID [email protected]
Qualification M S & M.Tech
Specialization Electronics and Controls & CSE
Teaching Experience 33 Yrs
Industrial Experience 01 Research Experience Nil
Number of Technical Papers Published in National / International Journals 17 Number of Workshops attended 15
Number of Students guided at UG Level 132 Number of Students guided at PG Level 3
Number of Research Scholars guiding Nil Additional Responsibilties Administrative work of college and department, Mentoring students.
Membership in Professional Bodies ISTE (Life Member), MIE (Member of Institute of Engineers (India)), CSI (Life member).
drttit-Faculty Email ID [email protected]
Qualification Ph.D.,
Specialization Wireless Communication,
Teaching Experience 26 Yrs
Industrial Experience 2.3 Yrs Research Experience 8 Yrs
Number of Technical Papers Published in National / International Journals 4 Number of Workshops attended 15
Number of Students guided at UG Level 10 Number of Students guided at PG Level 5
Number of Research Scholars guiding 5 Additional Responsibilties IQAC Coordinator, Research Coordinator(ECE), Seminar Coordinator, e-Shiksana Lab Coordinator,
Membership in Professional Bodies ISTE, IA Engg,ISRD
drttit-Faculty Email ID [email protected]
Qualification M.Tech (Ph.d)
Specialization Electronics & Communication
Teaching Experience 19 Yrs
Industrial Experience 4 Research Experience 4 Yrs
Number of Technical Papers Published in National / International Journals 12 Number of Workshops attended 10
Number of Students guided at UG Level 92 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties Organizing committee member for the national conferences RTCCI-2009, RAET-2011 and RAEST-2018 , Event co-ordinator for GOLD RUSH and TECHNORUSH, Test incharge, DCS for conducting VTU exams, Disciplinary committee member, Member of Greivience cell, AICTE, LIC and NBA co-ordinator at department level
Membership in Professional Bodies ISTE,IEI
drttit-Faculty Email ID [email protected]
Qualification M.E (PhD)
Specialization Electronics and Communication Engg
Teaching Experience 21 Yrs
Industrial Experience 1 Research Experience 5 Yrs
Number of Technical Papers Published in National / International Journals 10 Number of Workshops attended 23
Number of Students guided at UG Level 74 Number of Students guided at PG Level 8
Number of Research Scholars guiding Nil Additional Responsibilties Cultural and SC/ST Committee Chief Coordinator
Membership in Professional Bodies Nil
drttit-Faculty Email ID [email protected]
Qualification M.E
Specialization EMBEDDED SYSTEM DESIGN
Teaching Experience 21 Yrs
Industrial Experience 1 Research Experience 9 Yrs
Number of Technical Papers Published in National / International Journals 16 Number of Workshops attended 7
Number of Students guided at UG Level 39 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties ERP Coordinator
Membership in Professional Bodies ISTE, IEI
drttit-Faculty Email ID [email protected]
Qualification M.E.,(Ph.D)
Specialization Applied Electronics
Teaching Experience 12 Yrs
Industrial Experience Nil Research Experience 6 Yrs
Number of Technical Papers Published in National / International Journals 6 Number of Workshops attended 12
Number of Students guided at UG Level 28 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties Research / Quality, Patents, National & International Conference, Quality Cell (IQAC), Purchases, Records and Maintainance.
Membership in Professional Bodies IETE, IEI
drttit-Faculty Email ID [email protected]
Qualification Ph.D
Specialization Process Control
Teaching Experience 11.5 Yrs
Industrial Experience Nil Research Experience 3.5 Yrs
Number of Technical Papers Published in National / International Journals 6 Number of Workshops attended 13
Number of Students guided at UG Level 48 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties KSCST Project Coordinator
Membership in Professional Bodies ISTE
drttit-Faculty Email ID [email protected]
Qualification M.E.
Specialization Microelectronics Systems
Teaching Experience 8.5 Yrs
Industrial Experience Nil Research Experience Nil
Number of Technical Papers Published in National / International Journals 5 Number of Workshops attended 9
Number of Students guided at UG Level 28 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties Dept. NBA Coodrinator, TEST INCHARGE
Membership in Professional Bodies
drttit-Faculty Email ID [email protected]
Qualification M.Tech.
Specialization Signal Processing
Teaching Experience 7 Yrs
Industrial Experience Nil Research Experience Nil
Number of Technical Papers Published in National / International Journals 5 Number of Workshops attended 9
Number of Students guided at UG Level 29 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties Result Analysis coordinator
Membership in Professional Bodies IETE, IEI
drttit-Faculty Email ID [email protected]
Qualification M.Tech.,
Specialization DIGITAL COMMUNICATION and NETWORKING
Teaching Experience 8 Yrs
Industrial Experience Nil Research Experience Nil
Number of Technical Papers Published in National / International Journals 7 Number of Workshops attended 4
Number of Students guided at UG Level 28 Number of Students guided at PG Level 2
Number of Research Scholars guiding Nil Additional Responsibilties CISCSO TRAINER, COLLEGE SPORTS COORDINATOR
Membership in Professional Bodies INSTITUTE OF ENGINEERS
drttit-Faculty Email ID [email protected]
Qualification BE,MTecH.,
Specialization Digital Electronics and Communication systems
Teaching Experience 7 Yrs
Industrial Experience 6 months Research Experience Nil
Number of Technical Papers Published in National / International Journals 7 Number of Workshops attended 7
Number of Students guided at UG Level 27 Number of Students guided at PG Level 1
Number of Research Scholars guiding Nil Additional Responsibilties CISCO TRAINER, NAAC COORDINATOR
Membership in Professional Bodies IEI.
drttit-Faculty Email ID [email protected]
Qualification Mtech
Specialization VLSI DESIGN & EMBEDDED SYSTEMS
Teaching Experience 5 Yrs
Industrial Experience 1 Research Experience Nil
Number of Technical Papers Published in National / International Journals 5 Number of Workshops attended 7
Number of Students guided at UG Level 16 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties Technical Cordinator, Internship coordinator
Membership in Professional Bodies nil
drttit-Faculty Email ID [email protected]
Qualification BE, M.TECH
Specialization ELECTRONICS
Teaching Experience 7 Yrs
Industrial Experience 1 Research Experience Nil
Number of Technical Papers Published in National / International Journals 5 Number of Workshops attended 4
Number of Students guided at UG Level 10 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties Attendance Coordinator
Membership in Professional Bodies IEI
drttit-Faculty Email ID [email protected]
Qualification M.Tech
Specialization DIGITAL COMMUNICATION AND NETWORKING
Teaching Experience 3 Yrs
Industrial Experience 16 WEEKS Research Experience Nil
Number of Technical Papers Published in National / International Journals 3 Number of Workshops attended 4
Number of Students guided at UG Level 6 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties Dept.NEWS LETTER COORDINATOR, UBA/SAGY
Membership in Professional Bodies NIL
drttit-Faculty Email ID [email protected]
Qualification M.Tech
Specialization VLSI DESIGN AND EMBEDDED SYSTEMS
Teaching Experience 5 Yrs
Industrial Experience Nil Research Experience Nil
Number of Technical Papers Published in National / International Journals 5 Number of Workshops attended 4
Number of Students guided at UG Level 8 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties FDP Committee Member
Membership in Professional Bodies NIL
drttit-Faculty Email ID [email protected]
Qualification M.Tech
Specialization Digital Electronics add Communication
Teaching Experience 1.5 Yrs
Industrial Experience 1 Research Experience Nil
Number of Technical Papers Published in National / International Journals 1 Number of Workshops attended 5
Number of Students guided at UG Level 4 Number of Students guided at PG Level Nil
Number of Research Scholars guiding Nil Additional Responsibilties Test Coordinator
Membership in Professional Bodies
College Vision:
  1. To produce technically competent engineers having innovative skills, positive attitude, leadership and professional ethics, with a focus on developing sustainable and new technology.


College- Mission:
  1. Create a conducive environment for teaching, learning and innovation by providing state of the art infrastructure.
  2. Learn sustainable and new technologies through industry institute collaborations.
  3. Produce technically competent engineers with ethics, discipline and social consciousness through holistic education.


ECE Dept.-Vision
  1. Graduates to be recognized in the field of Electronics and Communication engineering ensuring academic excellence with innovative technical skills and professional ethics.


ECE- Mission
  1. Imparting quality technical education through innovative teaching learning process.
  2. Active association with industry to meet the growing challenges in the society.
  3. Develop overall competency with professional ethics by providing training programs.


Program Outcomes (PO)
Graduates will be able to:
  1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.
  2. Problem analysis: Identify, formulate, review research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences.
  3. Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.
  4. Conduct investigations of complex problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.
  5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modelling to complex engineering activities with an understanding of the limitations.
  6. The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.
  7. Environment and sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.
  8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.
  9. Individual and team work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.
  10. Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.
  11. Project management and finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
  12. Life-long learning: Recognize the need for and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.
Program Educational Objectives (PEOs)
PEO 1:Graduates shall have successful career in Electronics and Communication Engineering with sound fundamental knowledge in mathematics, science and engineering practice.
PEO 2:Graduates shall be professional in applying the principles of Electronics and Communication with a focus on innovation, research and having awareness of societal impact.
PEO 3:Graduates shall have ability to work in a team with professional ethics, good communication skills to achieve lifelong learning.
Program Specific Outcomes (PSOs)

PSO 1: Demonstrate engineering knowledge in the various core streams of electronics engineering, namely embedded systems, VLSI design, Communication, Networking and signal processing.
PSO 2: Identify the root cause of a problem and solve it by applying modern tools such as Cadence, MATLAB, Xilinx, Network Simulator, LabVIEW using research based approach and innovation.
PSO 3: Function competently as an individual/part of multidisciplinary teams, of industry/educational/research organization demonstrating extraordinary communication skills and leadership qualities with social and ethical commitment to achieve environmental sustainability.
ACADEMIC COUNCIL MEMBERS
Sl NoMember NameDesignation & AddressCommittee Member
1 Prof. Ruckmani Divakaran HOD ECE Dean (Administration) Chairman
2 Dr. Palani Swamy Professor Member
3 Mrs. Vijaya Bharathi M Associate Professor Member
4 Dr. Vijayalakshmi G V Associate Professor Convenor
5 Mr. C Shiva Kumar Scientist-V & HOD, MES department, NIRM Member
6 Mr. Neharu Babu General Manager, EM Division, BEML KGF Member
6 Prof. G Venkatesha Professor & HOD ECE Brindavan College of Engineering Member
7 Dr. Ganesh R Naik PhD, RMIT University,
CRC Post- Doctoral Research fellow at MARCS Institute,
of brain behavior Sydney and development, Australia 		Member
SL. No Academic Year Name of the student Reg No Percentage University rank
1 1993-1997 NISHAKUMARI J P 93RD035 75.1 -
2 1994-1998 JYOTHI J 94RD014 72.5 -
3 1995-1999 PRATHIBA N 95RD031 74.3 -
4 1996-2000 JALAJA K V 96GREE2011 77.1 -
5 1997-2001 SURUMBA R 97GREE2048 75.5 -
6 1998-2002 PRASAD B C 1GV98EC031 81.39 -
7 1999-2003 MAHESH NARAYAN M 1GV99EC018 79.10 -
8 2000-2004 SAVITHA H L 1GV00EC032 78 -
9 2001-2005 HARIPRASAD DESHPANDE 1GV01EC011 79.5 -
10 2002-2006 NETRA S G 1GV02EC023 79.10 -
11 2003-2007 KASTURI M 1GV03EC018 85.6 3rd Rank
12 2004-2008 MAHESH K S 1GV04EC022 72.2 -
13 2005-2009 CHANDANA K V 1GV05EC012 78.7 -
14 2006-2010 KRUTHIKA R 1GV06EC014 76.4-
15 2007-2011 VINAY KUMAR S L 1GV07EC059 77.8 -
16 2008-2012 SANDHYA R 1GV08EC044 83.68 7th Rank
17 2009-2013 HARIPRIYA N 1GV09EC007 80.19 -
18 2010-2014 TABREZ PASHA 1GV10EC069 83.30 -
19 2011-2015 SATHISH KUMAR S 1GV11EC045 81.74 -
20 2012-2016 JAYANTHI S K 1GV12EC026 84.42 -
21 2013-2017 NAGAMANI N 1GV13EC042 78.61 -
22 2014-2018 SUGANTHI S K 1GV14EC065 87.83 2nd Rank



Basic Electronics 2015 Click to View
Basic Electronics 2017 Click to View
Basic Electronics 2018 Click to View
EC Syllabus 10EC Click to View
EC 2015 SCHEME Click to View
EC 2017 SCHEME Click to View
ece-HOD
Dr. Vijaya Bharthi M



Designation : HOD & Associate Professor
Email Id : [email protected]
Specialization : Electronics & Communication
Teaching Experience :19 Yrs

Newsletters
2017-18 Click to View
2016-17 Click to View
2015-16 Click to View
Publications
  1. Mrs. Vijayalakshmi G V, Associate Professor presented a paper on “Cubic SVM classifies based feature extraction and emotion detection from speech signals “inSensor Networks and Signal Processing (SNSP 2018)during 28thto 31st Octoberat Xi’an University of Science and Technology , China.
  2. Mrs.Vijaygeetha, Associate Professor published a paper on “A Multiscale Fusion Approach for Changed Deduction in SAR Images “ inInternational Journal of Engineering & Technology (UAE), 7(4.10)(2018)104-111-July 2018.
  3. Mrs. Vijaya Bharathi M, Associate professor , Prof. Kaustab Ghosh,Prof. Priyankar Paira published a paper on “Water-mediated green synthesis of PbS quantum dot and its glutathione and biotin conjugates for non-invasive live cell imaging” Royal Society open science journal, Volume5, issue 3, January 3rd 2018.
  4. Mrs. Vijaya Bharathi M, Associate professor , Prof. Kaustab Ghosh,Prof. Priyankar Paira published a paper on “Surface immobilization of Biotin-DNA conjugates on polystyrene beads via SPAAC for biological interaction and cancer theranostic application”,New Journal of Chemistry, Volume42, issue 11, 17th April 2018, DOI:10.1039/C8NJ00814K.
  5. Mrs.Vijaya Bharathi M, Associate Professor,Ms. Devika S, Asst. Professor , Sneha.H, Mahesh.M, Shwetha.N, Sowmya.S, presented a paper on “Forward Error Correcting Implementation using Convolution Encoder and Viterbi Decoding” , in RAEST 2018 ,Dr.TTIT, KGFon 9th May and published in IJEECS- UGC Approved ISSN:2347 – 2820.
  6. Mrs.Vijayalakshmi G V ,Associate professor, Neha ,Jhansilakshmi ,Jabeen firdous, Priyanka U presented a paper on “Design and implementation of security system for ship intervention.”at 2nd national conference NC-EVEN 2018 in Brindavan college of engineering,Bangalore.
  7. Mrs.Vijayalakshmi G V ,Associate professor, presented a paper on “HOG based Gesture recognition for human computer interaction “, in RAEST 2018 ,Dr.TTIT,KGF on 9th May and published in IJEECS- UGC Approved ISSN:2347 – 2820.
  8. Mrs.Vijayalakshmi G V ,Associate professor ,Manusha S, Monisha K,Rakshana V, Resha Rpresented a paper on “Brain Cancer Detection Using Image Fusion“, in RAEST 2018 ,Dr.TTIT,KGF on 9th May and published in IJEECS- UGC Approved ISSN:2347 – 2820.
  9. Mrs. Jenitha A, Associate professor ,Dhana Lakshmi P, Jagannathan B , Niranjanaiah MG , Priyanka R ,presented a paper on “ A Personal Assistive System for Monitoring Calorie and Nutrition from Food Image” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820.
  10. Mrs.Inbalatha K ,Asst. Professor , Asha D, Manasa V , Kavya M T, Pavithra R , presented a paper on “LV Segmentation using Deep Convolution Neural Network and Extraction of Different Region from Segmented LV Region”, in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820.
  11. Mrs. Inbalatha K, Assistant Professor, published a paper on ‘ Inevitable dissection of left ventricle aimed at discovery of cardiac blood flow appraisal ‘ , IJET, Volume 7 (1.5)-January 2018 152-157 ,Special issue 5 scopus indexed journal.
  12. Mrs. Inbalatha K, Assistant Professor, published a paper on ‘ Premature cardiac virdict plus classification of Arrrhythmias and myocardail ischemia with K-NN Classifier ‘in springer .volume 28 , Febraury 2018 ,306-314.
  13. Mr. Rajesh Kumar Kaushal,Asst Professor, Surekha N., Yamuna NAkhil Kumar A. J, Naveen Kumar K. G.presented a paper on“E-Health Patient Monitoring System using IoT” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820.
  14. Mr. Rajesh Kumar Kaushal,Asst Professor, Ramya.R,Sowmya.MN,Sumiya Sulthana, Vinitha.M, presented a paper on “Car Surveillence and Driver Assistance using Black Box with the Help of GSM And GPS Technology” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820.
  15. Mrs. Nandini G.N,Asst. Professor , Sheba. C, Sandya.K, Siddivinayaka, presented a paper on“IoT based Electronic Voting System” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820.
  16. Mr.Shashi Kiran S, Asst. Professor, Monisha S, Preethi M, Suresh,Vikram K,presented a paper on“Dynamic Decision Based Spectrum Sharing Framework for Next Generation (5G) System” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820.
  17. Mr. Shashi Kiran S, Asst. Professor, Deepa.V, Priya N K, Sunil kumar D C , Santhosh kumar V,presented a paper on“User Association and Resource Allocation Optimization in LTE Cellular Network.” , in RAEST 2018 ,Dr.TTIT, KGF on 9th May and published in IJEECS- UGC Approved ISSN:2347 – 2820.
  18. Mr.Srinivas Babu N ,Asst. Professor, Divyashree V,presented a paper on“Dynamic access protocol based spectrum sharing for Ad-hoc device to device user.” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820.
  19. Manjushree K C ,Asst. Professor, Bhavya G Vennela V Manohara S P Nagaraja B M,presented a paper on“Heartbeat Sensor using Arduino with IoT”in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820.
  20. Ms. Mohana C,Asst. Professor, Ganesh k, Sayeed Saifuddin Saheer, “ LI-FI Based Indoor Navigation System for Blind and Illiterate People”in RAEST 2018 ,Dr.TTIT, KGFon 9th May and published in IJEECS- UGC Approved ISSN:2347 – 2820.
  21. Prof. Ruckmani Divakaran published a paper on “Design and Development of a Wireless Video Transmission System using Adaptive Channel Coding Techniques” IJIRCCE Volume-5 Issue-5 on 5th May -2017. DoI:10.15680/IJIRCCE.2017.0505181
  22. Mrs.Vijayalakshmi G V published a paper on “Design and Development of a Novel Technology for Smart Irrigation” in IJCSIS Volume 15 Issue-5, ISSN 1947-5500 May-2017.
  23. Mrs.Jenitha A published a paper on “Implementation of Genetic Algorithm for performance improvement in MPSOC “ in International journal of technical research and engineering Volume 3 , Issue 8, April 2016
  24. Ms. Kanimozhi S published a paper on “Autonomous monitoring of the Automobile parameters for Road safety” in International research Journal of Engineering technology, Volume 3, issue 5, May 2016. E-ISSN2395-0056.
  25. Mrs. Vijayalakshmi G V, Ms. Mohana C published a paper on “A multimodel Biometric recognition system based on Decision-Level fusion for user Authentication” in ARPN Journal of Engineering and applied sciences, Volume 11, pp 22, ISSN 1819-60, Dec 2016.
  26. Mrs. Inbalatha K published a paper on “Early detection of Myocardial Ischemia for predicting stenosis using Frangi vesselness filter in IJARCET Volume 5, issue 8, pp 1843-48, August 2016.
  27. Mrs. Vijayalakshmi. G V, Mrs. Mamatha. V published a paper on “A novel Iris segmentation for user authorization”in International journal Volume 3, issue 2 MarchApril 2015, Paper ID: 042015.1946.
  28. Mrs. Vijayalakshmi. G V “Invariant face recognition using Zernike moments combined with feed forward Neural Network” International journal of Bio-metrics DOI=10.1504/IJBM.2015.071950, Volume 7, No.3, pp 286-307, September 2015.
  29. Mrs. Vijaya Geetha R published a paper on “Laplacian Pyramid based speckle reducing anisotropic diffusion (LPSRAD) on SAR images in International journal of applied engineering research. Volume 10, issue 30, 22702-22707, March 2015.
  30. Mrs. Vijayalakshmi. G V published a paper on “LBP based facial expression recognition using KNN classifier”in International Engineering research journal Volume 2, issue 3, 2015, page 1316-1321.
  31. Mrs.Jenitha A Equal and Unequal Memory Partitioning and Task Scheduling for Multi-Processor System On Chip International Journal Advancement in research and technology ISSN 2347-4718 , Volume 2, Issue 9, May 2015.
  32. Mrs.Jenitha published a paper on “A Implementation of ECE Signal using ACF algorithm “ in International journal of technical research and engineering ISSN 23474716, Volume 2 , Issue 10, June 2015.
  33. Mrs.Jenitha “ A Tag Comparison method for L2 Cache” in International journal of technical research and engineering ISSN : 2347 – 4718 , June 2015
  1. Suganthi S. K, Shyla Kumari I, Sindhuja R, Sushma V, presented a paper on“An Area Efficient Implementation of Feedforward FFT Architecture” , in RAEST 2018 ,Dr.TTIT, KGF on 9th May and published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Prof. Ruckmani Divakaran, HOD& Dean(Administartion).
  2. Sneha.H, Mahesh.M, Shwetha.N, Sowmya.S, presented a paper on “Forward Error Correcting Implementation using Convolution Encoder and Viterbi Decoding” , in RAEST 2018 ,Dr.TTIT, KGFon 9th May and published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Mrs.Vijaya Bharathi M, Associate Professor.
  3. Manusha S, Monisha K,Rakshana V, Resha Rpresented a paper on “Brain Cancer Detection Using Image Fusion“, in RAEST 2018 ,Dr.TTIT,KGF on 9th May and published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Mrs.Vijayalakshmi G V ,Associate professor.
  4. Dhana Lakshmi P, Jagannathan B , Niranjanaiah MG , Priyanka R ,presented a paper on “ A Personal Assistive System for Monitoring Calorie and Nutrition from Food Image” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Mrs. Jenitha A, Associate professor.
  5. Asha D, Manasa V , Kavya M T, Pavithra R , presented a paper on “LV Segmentation using Deep Convolution Neural Network and Extraction of Different Region from Segmented LV Region”, in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Mrs.Inbalatha K ,Asst. Professor.
  6. Surekha N., Yamuna NAkhil Kumar A. J, Naveen Kumar K. G.presented a paper on“EHealth Patient Monitoring System using IoT” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Mr. Rajesh Kumar Kaushal,Asst Professor.
  7. Ramya.R,Sowmya.MN,Sumiya Sulthana, Vinitha.M, presented a paper on “Car Surveillence and Driver Assistance using Black Box with the Help of GSM And GPS Technology” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Mr. Rajesh Kumar Kaushal,Asst Professor.
  8. Sheba. C, Sandya.K, Siddivinayaka, presented a paper on“IoT based Electronic Voting System” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Mrs. Nandini G.N,Asst. Professor.
  9. Monisha S, Preethi M, Suresh,Vikram K,presented a paper on“Dynamic Decision Based Spectrum Sharing Framework for Next Generation (5G) System” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Mr.Shashi Kiran S, Asst. Professor.
  10. Deepa.V, Priya N K, Sunil kumar D C , Santhosh kumar V,presented a paper on“User Association and Resource Allocation Optimization in LTE Cellular Network.” , in RAEST 2018 ,Dr.TTIT, KGF on 9th May and published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Mr. Shashi Kiran S, Asst. Professor.
  11. Divyashree V,presented a paper on“Dynamic access protocol based spectrum sharing for Ad-hoc device to device user.” , in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Mr.Srinivas Babu N ,Asst. Professor.
  12. Bhavya G Vennela V Manohara S P Nagaraja B M,presented a paper on“Heart beat Sensor using Arduino with IoT”in RAEST 2018 ,Dr.TTIT, KGFon 9th Mayand published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Manjushree K C ,Asst. Professor.
  13. Ganesh k, Sayeed Saifuddin Saheer, “ LI-FI Based Indoor Navigation System for Blind and Illiterate People”in RAEST 2018 ,Dr.TTIT, KGF on 9th May and published in IJEECS- UGC Approved ISSN:2347 – 2820 under the guidance of Ms. Mohana C,Asst. Professor.
  14. Best paper award for the paper titled “GTP based partial face recognition “ in the national conference on emerging trends in VLSI , Embedded and networking (NC_EVEN 2017) held at Brindavan College of Engineering , Bangalore on 11th May 2017 by Vidya Shree V, Swathi, Sowmiya and Supriya under the guidance of Mrs Vijayalakshmi G V, Associate Professor. 15. Best paper award for the paper titled “ Design and implementation of security system for ship intervention at 2nd national conference NC-EVEN 2018 at Brindavan college of engineering, Bangalore by Neha , Jhansilakshmi , Jabeen Firdous , Priyanka u of 8th semester under the guidance of Mrs.Vijayalakshmi G V, Associate Professor.
  DIGITAL ELECTRONICS LAB
CAED
This laboratory course enables students to get practical knowledge in design, realization & verification of Demogran's theorem, sum of products and product of sum forms, full/parallel adders, subtractors & magnitude comparator, multiplexers using logic gates, demultiplexers and decoders, flip-flops, shift registers and counters and also simulation of full adder and up/down counters using Pspice simulation tool.
LAB EQUIPMENTS
  1. Digital Trainer Kits Efficient make
  2. Digital Trainer Kits SIMS
  3. Digital Trainer Kits Micro Logics
  4. Digital Trainer KitsADD
  5. Digital IC Tester
  6. Digital CRO
  7. Servo Stabilizer Aplabs
  8. Patch Chords

Faculty Incharge: Mrs. Manjushree K Chavan

Staff Incharge: Mr.Suresh Babu J

  ANALOG ELECTRONICS LAB
CAED
Analog Electronics Lab familiarizes the students with the fundamentals of analog electronics. This is the fundamental and the core laboratory, which introduces a student to the world of electronic circuits and equipments. This laboratory focuses on the skills of designing, developing, and testing wide range of electronic circuits using test and measuring instruments like cathode ray oscilloscopes, function generators, digital multimeters etc. In this lab, the students will be able to carry out the experiments and analyze the electronic circuits such as applications of diodes, regulators, amplifiers, oscillators etc.
LIST OF EQUIPMENTS
  1. DC 12V Power Supply
  2. Digital Storage Oscilloscope-50Mhz
  3. Dual Power Supply(0- 30V)
  4. DRB 1006 ,1005
  5. Function Generator
  6. Decade Capacitance Box-5 dials
  7. Decade InductanceBox-5 dials
  8. Decade InductanceBox-5 dials
  9. Transformer (9-0-9)
  10. Digital Voltmeter(0-200V DC)
  11. Digital Ammeter(0-200mA DC)
  12. Digital multimeter
  13. Digital micro ammeter (0-2mA)
  14. 19 Audio generators
  15. Dual Power Supply
  16. RPS (0-30V)
  17. Dual Power Supply (0-30V)
  18. DRB
  19. Stabilizer

Staff Incharge: Dr.Vijayalakshmi G V

Faculty Incharge: Dr.Vijayalakshmi G V

  AC+LIC & ADVANCED COMMUNICATION LAB
CAED
The laboratory provides the students with a basic understanding regards linear op-amp circuit which focuses on applications such as mulitivibrators using 555, DAC, Active filters, Oscillators, Differentatior, Summer and Integartor.The advanced communication laboratory covers design and verification of the concepts of modern digital communication system that operates from MHz to GHz range. optical communication deals with the study of the cherteristics of fiber optics. The lab deals with the study of analog experiments based on analog and digital modulation and demodulation techniques.
LIST OF EQUIPMENTS
  1. Oscilloscope
  2. POWER SUPPLY
  3. CRO
  4. Dual function generator
  5. AM/FM function pulse generator 30MHz
  6. 3MHz function generator
  7. function generator counter
  8. DRB, DCB and DIB
  9. Dual Power supply
  10. DC digital volt meter
  11. DC digital ammeter
  12. Measurement system Regulated power supply
  13. Optical fiber kit system with accessories
  14. Microwave test benches & accessories ,veer microwave
  15. Micro strip Microwave test benches & accessories
  16. PSK modulation & demodulation kit
  17. QPSK modulation & demodulation kit
  18. DPSK modulation & demodulation kit
  19. Voltage DC digital meter
  20. Current DC digital meter
  21. LAN power supply

Staff Incharge: Mr.Suresh Babu J

Faculty Incharge: Ms.Kanimozhi S

  HDL LAB
CAED
This laboratory provides a platform to describe the structure and behavior of electronic circuits, and most commonly, digital logic circuits. It also allows for the simulation and synthesis of a HDL description into a netlist which can then be placed and routed to produce the set of masks used to create an integrated circuit.Xilinx ISE is a design environment for FPGA for synthesis and analysis of HDL designs.
LIST OF EQUIPMENTS
  1. HP Systems: configuration
  2. Processor: Intel Core Duo Speed: 3GHz
  3. Ram: 2GB
  4. HD: 320GB,OS:Windows XP SP2
  5. Tool: XILINX ISE9.1i
  6. Xilinx Spartan 3- XC3S400 FPGA
  7. JTAG Cables (GPIO-I & II) Stepper motor, DC motor,LCD,ADC,DAC
  8. ADM TK BASE HDL KITS
  9. XILINX FPGA’S XC2S50 , XC2S100, XC2S200, XC3S400
  10. Accessories DC Motor , Stepper motor & Interface, DAC Interface. SMPS
  11. XILINX CPLD’S XC9572
  12. JTAG Cables(with necessary connectors)

Faculty Incharge: Mrs.Rajesh Kumar Kausal

  DSP LAB
CAED
This Laboratory provides testing the software and hardware tools with Code Composer Studio. Programming examples to test the tools Digital signal processors such as the TMS320C6x (C6x) family of processors are like fast special-purpose microprocessors with a specialized type of architecture and an instruction set appropriate for signal processing. MATLAB is a software package for high performance numerical computation and visualization provides an interactive environment with hundreds of a built in functions for technical computation, graphics and animation.
Equipment
  1. HP Systems: configuration
  2. Processor: Intel Core Duo Speed: 3GHz
  3. Ram: 2GB
  4. HD: 320GB,OS:Windows XP SP2
  5. Matlab 5.0 with Signal Processing Toolbox.
  6. MATLAB R2008b with Signal Processing Toolbox new Version 6.9
  7. DSK floating point TMS320C6713 with CCStudio & Accessories
  8. Server, Lenovo Intel Dual Core 2 with LCD monitor.

Faculty Incharge: Mrs.Jenitha A

  MICROPROCESSOR LAB
CAED
This laboratory introduces the assembly language programming of 8086 , it gives a practical training of interfacing the peripheral devices with 8086 microprocessor. The main objective of this laboratory is to introduce the basic concepts of microprocessor and to develop assembly language programming skills in students
  1. Stepper Motor Interface ALS-NIFC-01
  2. Keyboard/display Interface ALS-NIFC-09
  3. Logic Controller Interface ALS-NIFC-05
  4. Op-Amp Power Supply
  5. IO Card PCI 24 PIN
  6. RS 232 Cable
  7. HP Compaq
  8. systems Stepper Motor 5V, 1.8/step
  9. MASM 6.0

Faculty Incharge: Mr.Rakesh B N

  VLSI LAB
CAED
The laboratory provides hands-on experience to students in the field of analog and digital circuit design to conduct world class research. The laboratory is designed to expose the students to a set of tools for CMOS design, starting with circuit simulation and leading to physical layout, design rule checking, and extracted circuit simulation. Students gain knowledge in using EDA tools to design, simulate, and verify schematics and layout of logic gates. The VLSI laboratory is well equipped with the most up-to-date industry standard VLSI tool Cadence.
LIST OF EQUIPMENTS
  1. HP Systems, OS: Red Hat Linux Enterprises
  2. Cadence Software

Faculty Incharge: Mrs.Vijaya bharathi M

  COMPUTER NETWORKS LAB
CAED
This Laboratory is designed to have two cycles of experiments. In first cycle of experiments students will have exposure to open source software called Network Simulator Version 2 (NS-2) for simulation and Programmers Note Pad for writing the programs. In NS-2 students will perform simulation of wired as well as wireless network functions and Protocols. In second cycle of experiments students uses Turbo C++ which gives them the knowledge of C Programming, thus developing Network Protocols and routing Protocols.
LIST OF EQUIPMENTS
  1. HP Systems, OS: Windows 7
  2. Software: Network Simulator-2, Programmers Notepad, Turbo C++

Faculty Incharge: Mr.Srinivas Babu N

  EMBEDDED CONTROLLER LAB
CAED
The laboratory will enable the students to understand the instruction set of ARM Cortex M3, a 32 bit microcontroller and the software tool run by programming in assembly and C- lannguage in Keil tool . It allows C Language programs and library functioncs for embedded system applications , interface external devices and I/o with ARM Cortex-M3.
LIST OF EQUIPMENTS
  1. LPC178 ARM CORTEX M3 Starter Kits and Accessories
  2. Keil tool by ARM
  3. Flashmagic

Faculty Incharge: Mrs.VijayaGeetha R

  POWER ELECTRONICS LAB
CAED
This laboratory provides the students practical knowledge on high power applications such as semiconductor devices , transistors, thyristors , controlled rectifiers , converters , AC & DC motors.
LIST OF EQUIPMENTS
  1. Series inverter module inbuilt firing unit
  2. Parallel inverter module inbuilt firing unit
  3. CRO
  4. Stabilizer
  5. Single phase bridge inverter firing unit
  6. DC Chopper module
  7. DC Chopper firing unit
  8. AC voltage controller using TRIAC-DIAC module
  9. Single phase half controlled converter power circuit
  10. Single phase converter firing unit
  11. Single phase fully controlled converter module
  12. 1kv isolation transformer
  13. 30-0-30 inverter transformer
  14. Differential module
  15. High voltage power supply
  16. Rheostat
  17. DC chopper firing unit(variable frequency)
  18. DC motor Single phase induction motor
  19. Universal motor(6000rpm)
  20. SCR Converter module
  21. Auto transformer 5A
  22. Analog multimeter
  23. Digital multimeter
  24. Digital milli ammeter
  25. Digital voltmeter
  26. Dual power supply
  27. Transformers
  28. AC Ammeter AC Voltmeter
  29. Analog Voltmeter
  30. Measurement systems- RPS
  31. Dc Motor/Control unit
  32. RC Half and Full wave Firing circuit
  33. AC Voltage controller using TRIAC DIAC
  34. Universal Motor
  35. SCR,TRIAC and DIAC Characteristics study Unit
  36. Series Inverter
  37. Forced commutation Study Unit
  38. MOSFET and IGBT characteristics study Unit
  39. Single Phase Converter Firing Unit
  40. DC Chopper Power circuit Unit
  41. Single Phase Converter Power circuit
  42. Parallel Converter
  43. UJT Firing circuit
  44. Stepper motor Controller
  45. Digital Firing Circuit
  46. DC Chopper Firing Unit
  47. DC Motor with Load

Faculty Incharge: Mrs.Tamil Vani R

Non teaching staff : Mr.Suresh Babu J

  MICRONTROLLER LAB
CAED
This laboratory provides the platform to learn 8 and 16-bit microcontroller by assembly and C language using Keil and MSP430 Software tools. Also allows the students to understand interfacing applications.
LIST OF EQUIPMENTS
  1. ALS-SDA-51 MEL 8051(NEW)
  2. ALS-SDA-31-STAstand alone 8031/51 trainer kit(OLD)
  3. Temperature controller interface
  4. Heating container(1000 watts)
  5. NIFC-55 DC motor interfacing
  6. 89C61X2 flash microcontroller board
  7. MSP430F449 single chip microcontroller board with accessories
  8. Stepper motor and dc motor interface
  9. DAC and 4 relay interface
  10. Micro logics keypad(new)
  11. Elevator interface
  12. Temperature measurement and control interface
  13. Stepper motor
  14. Keypad and seven segment display interface
  15. NIFC-17 Elevator
  16. NIFC-01 stepper motor interface
  17. NIFC-45 keypad and LCD interface
  18. Power supply
  19. ALS-SDA-51 MEL-KBD keyboard
  20. CRO Oscilloscope OS-5020, 20MHZ

Faculty Incharge: Mrs.VijayaGeetha R

Department of Training & Placement 2018-19
Name Department Company Package (CTC)
CHETAN S ECE Tata Consultancy Services 3.5 LPA
MIRESH REDDY S ECE Tata Consultancy Services 3.5 LPA
SAINATH P A ECE WIRPO Limited 3.5 LPA
POMILA ECE WIRPO Limited 3.5 LPA
MANOHARA SP ECE West Line Shipping company 10 LPA
KISHORE R ECE West Line Shipping company 10 LPA
NIKHATH SUMAN ECE Eduvirtuoso 3.5 LPA
JOYSELIN PRIYANKA J ECE Eduvirtuoso 3.5 LPA
SNEHA ECE Tecnhnologies Global Pvt. Ltd 1.2 LPA
SAVITHA ECE Tecnhnologies Global Pvt. Ltd 1.2 LPA
ANISHA V ECE Tecnhnologies Global Pvt. Ltd 1.2 LPA
POOJA ERONISHA A ECE TalTech Solutions Pvt. Ltd. 1.2 LPA
ASHWINI S ECE TalTech Solutions Pvt. Ltd. 1.2 LPA
ANISHA V ECE TalTech Solutions Pvt. Ltd. 1.2 LPA
R DINESH KUMAR ECE TalTech Solutions Pvt. Ltd. 1.2 LPA
SAHANA R ECE TalTech Solutions Pvt. Ltd. 1.2 LPA
JEEVIKA MARY A ECE TalTech Solutions Pvt. Ltd. 1.2 LPA
PAVITHRA S ECE TalTech Solutions Pvt. Ltd. 1.2 LPA
ACTIVITY



ABOUT
COLLEGE
MANAGEMENT
GOVERNING COUNCIL
ADMISSION
TEACHING PROCESS
DEPARTMENTS
MECHANICAL ENGINEERING
ELECTRICAL AND ELECTRONICS ENGINEERING
MINING ENGINEERING
ELECTRONICS AND COMMUNICATION ENGINEERING
COMPUTER SCIENCE ENGINEERING
CIVIL ENGINEERING
DEPARTMENT OF SCIENCE
CAMPUS LIFE
CAMPUS
INTERNET
PLACEMENT
HOSTELS
TRANSPORTATION
GYM
OTHERS
WEBMAIL
ALUMNI
ERP
DR. T. THIMMAIAH INSTITUTE OF TECHNOLOGY
Oorgaum, Kolar Gold Fields, Karnataka - 563120
(Affiliated to VTU, Belgaum, Approved by AICTE - New Delhi)
An ISO 21001 Certified Institute
NAVIGATION
HOME ABOUT US ACADEMICS
Mechanical Electrical & Electronics Mining Electronics & Communication Computer Science Civil Department Of Science
CAMPUS LIFE PLACEMENT GALLERY CONTACT US DOWNLOAD


DrTTIT